High pressure unit designed for Hydrodemolition   Container 23 feet Special design   -Only one container for all. -Self supplied, no external electricity. -Easy handling and cost efficient in transport and set-up time. -Minimum space required at the site. -Robot and accessories are in the container for convenient transport and storage. The diesel engine and the high pressure pump are connected by means of a flexible coupling and assembled complete on a heavy-duty welded steel frame. The base frame is installed in the container on vibration isolators. A bag-type water filter prevents impurities from entering the system and pump. A booster pump is mounted between the water tank and the high-pressure pump to provide adequate inlet pressure.   Working pressure max. 1000 bar (14500 psi)   Capacity, flow PP550 1000 bar (14500 psi)     Power input PP550 412 kW (550 HP)     Capacity, flow PP700 261 l/min (69 gpm)   Power input PP700 473 kW (645 HP)   Engine speed 1800 rpm   Other flow and pressure rate by customers request   The safety shutdown system will automatically shut down the unit, or return it to low idle, in case of any malfunctions or safety alarms. Remote Control system with pressure on/off switch and emergency stop. When the remote control is switched to off position, the system will depressurize the pump and high-pressure hose and reduce the engine rpm to low idle. The container is sound insulated with a double door on the right side, double rear doors and hatches for the cooling air. The container can be equipped with a ”Roll off” frame, for easy on/off truck loading and transport. Built in workbench with vice and storage room for spare parts. Movable heavy hooks for storing of HP-hoses and cables. 24 volt electric system for lighting. Built in fuel tank and water tank.